taggat
Junior rider
Posts: 732
|
Post by taggat on Aug 2, 2012 8:12:22 GMT -4
Picked this up after hours of debating with previous owner. Original deal was to trade a 93 suzuki sidekick but they ended up wanting my project 82 cm400t. Well of course I wasnt going to say no. Running and rides needs some work. Wanted; drag bars, pods, front end swap, progressive shocks, rear tire, would be nice to ditch the mags and get wires, update the turn signals with new, speedometer cable, awh jeez there goes the money. Attachments:
|
|
|
|
Post by hogsausage on Aug 2, 2012 9:05:53 GMT -4
Nice. You can now have a proper bike on the road for GP weekend! Zing....
|
|
|
|
Post by cb500bobber on Aug 2, 2012 9:24:00 GMT -4
Nice bike and is that a sissy bar thats on it
|
|
taggat
Junior rider
Posts: 732
|
Post by taggat on Aug 2, 2012 9:35:00 GMT -4
Club approved? ;D
I havent seen a bar like it, its pretty sharp but its going to be removed.
Need some a mirror and a proper clutch cable if anyone has em.
|
|
550fi
Junior rider
75 CB 550 F1,79 CM 400 A,72 CT 70 K1,Unknown ct 70 clone 05 GY6 scooter ,70 CT 70
Posts: 624
|
Post by 550fi on Aug 2, 2012 15:43:43 GMT -4
Good score,looks like one off of cl.
|
|
taggat
Junior rider
Posts: 732
|
Post by taggat on Aug 2, 2012 16:04:47 GMT -4
It was, Im a craigslist troll...
|
|
taggat
Junior rider
Posts: 732
|
Post by taggat on Aug 7, 2012 9:09:31 GMT -4
Need standard risers, drag bar, chain, front pads, front caliper bleeder valve, longer clutch lever adjustment screw, speedometer cable, slip on exhaust?
Let me know if ya got some of that.
|
|
taggat
Junior rider
Posts: 732
|
Post by taggat on Aug 10, 2012 9:09:38 GMT -4
Parts ordered, brake pads from europe wtf and some white walls coming saturday. Gotta hit the bmv. Never enough time...
|
|
|
|
Post by flatout on Aug 10, 2012 19:37:04 GMT -4
Hey Tag, I have 2 sets of stock exhaust if your interested. I have other parts also,stock parts.
|
|
|
|
Post by flatout on Aug 10, 2012 19:39:42 GMT -4
Also have a seat with a new cover. The back half is even new unlike your seat
|
|
taggat
Junior rider
Posts: 732
|
Post by taggat on Aug 14, 2012 11:45:31 GMT -4
pm sent flatout
|
|
taggat
Junior rider
Posts: 732
|
Post by taggat on Aug 21, 2012 9:53:00 GMT -4
Need a tap for the bleeder? PO has jacked up the threads. Cant seem to get enough pressure to push out the old piston. sigh...
|
|
taggat
Junior rider
Posts: 732
|
Post by taggat on Aug 24, 2012 9:59:05 GMT -4
Fired the bike up to show it off and blew the clutch seals, black gold all over the floor.  |
|
taggat
Junior rider
Posts: 732
|
Post by taggat on Sept 25, 2012 8:52:18 GMT -4
Thanks to flatout I have new seat, wasnt the right year but Ill make it fit.
2into1 exhaust that's using some old bearing races for header spacers, well see if it leaks if so some gasket material will be added. Dual Disc upfront now utilizing 84 Interceptor calipers, brackets were fairly simple to make. White wall tires on some cleaner rims. Speedometer works now, thanks again flatout. Pods on, fuel filter, breather pod, grips...
Parts needed; drag bar, float for bs38 CV mikuni, new plug wires, cafe fairing?
|
|
taggat
Junior rider
Posts: 732
|
Post by taggat on Sept 27, 2012 10:26:38 GMT -4
Interesting old biker trick, beer cans to shim.
Had some 37mm clip-ons - two cans cut into strips, to fit on 35mm forks.
Took some patientence and lot of bolting unbolting but finally got it to tighten up to where it would hold my body weight.
|
|
