|
|
Post by leadkrm on Jun 11, 2011 11:29:01 GMT -4
there is a guy with a shop right off the 65 keystone exit. he is good. he makes custom wiring harnesses that are simple and easy to diagnose if a problem occurs down the road. they guys shop is called sportbikes unlimited (use to be called v-twin powerhouse) and the guy does good work. if you call and dont get an answer just leave a messege and he will call you back. im getting a harness made for my cb450. here is his contact info. Allen Martel: parts, repair, service, manufacturing, and high performance modifacation. 3510 s. keystone ave. unit L indianapolis, IN 46227 service is by appointment only! he is very busy right now so call him if you need something done and set something up. phone is (317) 590-1057 email is sportbikesunlimited@yahoo.com dont waste money on an old used harness that may or may not work. just spend the extra money to get a new one.
|
|
|
|
Post by tango911 on Jun 11, 2011 14:50:55 GMT -4
how much?
|
|
|
|
Post by leadkrm on Jun 11, 2011 15:53:26 GMT -4
I'm not sure how much he does custom sportbike harneses for 250 s it's worth calling and asking. He is a good friend of my father so I am getting a deal on the work
|
|
|
|
Post by lolitsdaelan on Jul 20, 2011 11:05:11 GMT -4
I just got some clip-ons back from them that needed wire holes drilled into them. Honestly, I was a bit let down by the quality of the work, considering it took an hour for two holes. Also it wasn't until I got home that I realized (and I'll accept fault for not mentioning it when I first showed up, but considering I gave him the original bars as well, I think that he should of mentioned something), that he failed to drill the two smaller holes that keep the peripherals from rotating around the bar.
To be fair, he did seem very knowledgeable and was very friendly, but as a first experience it didn't leave me eager to go back.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 28, 2011 17:04:01 GMT -4
stopped and talked toallen at sportbikes unlimited today. says they are moving to shelby and carson asap fyi
|
|
|
|
Post by leadkrm on Jul 28, 2011 22:11:56 GMT -4
Yea he is having problems with the guys next door and the land lord. He had someone try to break in Monday night so I went to lowes with him and i put a security gate for him today. I asked him about the bars he drilled and said he drilled the hole big enough to fit that little stud on the switch housing. He will be moving across from the dinner bell on Shelby and Carson over near Garfield park
|
|
|
|
Post by leadkrm on Jul 28, 2011 22:13:10 GMT -4
Who here has used his services?
|
|
|
|
Post by leadkrm on Dec 20, 2011 13:51:43 GMT -4
Hey guys. Sportbikes unlimited is now offering custom built swing arms and his own lowering links. He will start machining and fabricating his own parts the more he clears out space for his machining tools. Just thought id let people know. He also sells parts,oil and plugs. He can order anything too. High performance mods and custom mod services are also available.
|
|
