|
|
Post by cafepunk on Mar 28, 2012 19:34:01 GMT -4
i just bought a 75 cb360 and i am having a hell of a time finding stuff for my front disk breaks.. i still need a rotor and caliper and pads.. i was also wondering if i could get that stuff or even a whole new set of wheels from another bike. ?  |
|
barnfinder
Training Wheels
Ride On Ride Hard
Posts: 166
|
Post by barnfinder on Mar 29, 2012 10:18:06 GMT -4
Hello cafepunk,
I can understand pads, but a new caliper and rotor?
Most of the time pistons get seized up in calipers due too their make up of stainless shell and inner steel slug. The stainless usually pits and the steel starts corroding. Their are ways to remove a seized piston. And Honda rotors are usually bullet proof. Unless it was in an accident.
You can always find a donor bike for cheap and use what you need or you can get used parts from Cycle Recycle Part II over on 10th street. Hope this helps, if not let us know more on whats going on or happening.
Barnfinder
|
|
|
|
Post by hogsausage on Mar 30, 2012 11:40:38 GMT -4
+ 1 on barnfinder. Get yourself a manual if you don't already have one and tear into it. I would imagine some of it is cleanable/repairable.
|
|
