|
|
Post by williamc89 on Nov 24, 2011 19:49:01 GMT -4
im going to test fire this motor when i get coils.
what do i need eletrical wise, to test fire.
i was thinking coils and just hook the points to the coils and power to the coils from a battery, what you think, im going by how i wood test fire a car engine,,,
|
|
|
|
Post by cb500bobber on Nov 24, 2011 20:59:18 GMT -4
You need to get the manual for it so you can set the timing right and it will help more in detail on what you are suppose to do
|
|
|
|
Post by tango911 on Nov 25, 2011 14:50:12 GMT -4
i would put the bike together with engine and then fire it up after you check valves, points gap, timing, carbs, etc.... with a good wiring harness.
|
|
|
|
Post by williamc89 on Nov 25, 2011 22:24:00 GMT -4
everything checks out ok, i just have to get the harness and carbs and coils
|
|
|
|
Post by tango911 on Nov 26, 2011 9:49:54 GMT -4
i have carbs when your ready, i would get the coils new and harness new from cb750supply.com
|
|
|
|
Post by williamc89 on Nov 26, 2011 10:13:11 GMT -4
i still want them carbs, i just have to sell these old ones
|
|
|
|
Post by tango911 on Nov 26, 2011 11:28:25 GMT -4
10-4
|
|
