|
|
Post by felkman on Sept 8, 2011 21:47:56 GMT -4
Bike looks great!
|
|
|
|
Post by tango911 on Sept 9, 2011 8:00:17 GMT -4
def ready to see this one done! going to be sweet.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 10, 2011 23:07:41 GMT -4
You fabricating a seat for this or are you using the one pictured?
|
|
cjrenick
Training Wheels
1972 CL350
Posts: 186
|
Post by cjrenick on Sept 11, 2011 6:26:36 GMT -4
Wiring is ran thru the clubmans for cleaner look. Cables ran for routing. Turn signal, high beam and neutral indicators mounted. Will be forming the tail section, seat out of high density foam and then do a sandwich composite layup. Then it will be taken all apart for finishing and paint. While the motor gets tore down for new gaskets and seals. Barn, If you have a chance could you get some pictures of how you do the tail section? I hope to be doing a cafe one day. The seat is one of the things I was wondering about doing my self or just buying one already done. |
|
barnfinder
Training Wheels
Ride On Ride Hard
Posts: 166
|
Post by barnfinder on Sept 12, 2011 21:30:35 GMT -4
All usable electronics stored in tiddy place. Attachments:
|
|
barnfinder
Training Wheels
Ride On Ride Hard
Posts: 166
|
Post by barnfinder on Sept 12, 2011 21:32:38 GMT -4
Sealed battery location. Attachments:
|
|
cjrenick
Training Wheels
1972 CL350
Posts: 186
|
Post by cjrenick on Sept 13, 2011 9:48:24 GMT -4
Looking great! Is there any problem with air not getting to the electronics to keep them cool? I am hoping to get a CB next year to do a Cafe.
|
|
barnfinder
Training Wheels
Ride On Ride Hard
Posts: 166
|
Post by barnfinder on Sept 13, 2011 10:17:49 GMT -4
They are not to be completely encapsulated. Rectifier is the only concern. I can always move to under the cross tube support over the rear wheel.
|
|
barnfinder
Training Wheels
Ride On Ride Hard
Posts: 166
|
Post by barnfinder on Sept 13, 2011 20:47:34 GMT -4
New white face gauge overylay. Attachments:
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 13, 2011 22:15:29 GMT -4
Where did you pick up that headlight mount?
|
|
|
|
Post by tango911 on Sept 13, 2011 23:17:22 GMT -4
did you design your speedo overlay?
|
|
|
|
Post by novafrk on Sept 14, 2011 8:30:15 GMT -4
Great looking project.
|
|
barnfinder
Training Wheels
Ride On Ride Hard
Posts: 166
|
Post by barnfinder on Sept 14, 2011 10:09:55 GMT -4
The headlight ears are Emgo universal mounts. And the overlays are an ebay item. Fairly easy installation.
|
|
barnfinder
Training Wheels
Ride On Ride Hard
Posts: 166
|
Post by barnfinder on Sept 19, 2011 21:17:16 GMT -4
Form for tail section. Attachments:
|
|
barnfinder
Training Wheels
Ride On Ride Hard
Posts: 166
|
Post by barnfinder on Sept 19, 2011 21:18:41 GMT -4
Four layers for seat portion with two for cowl cover. Attachments:
|
|
