|
|
Post by hogsausage on Jul 29, 2011 9:19:12 GMT -4
I think I know the answer to this, but wanted to check around and get as much information and suggestions as I can before proceding. I'm looking at getting a rearset setup from clubman racing for my '71 650 build. Does anyone know if I need special motor mounts to mount them or if I can use the stock ones I have currently? My reasearch says I can go with the stock. But I always live by measure as many times as possible and cut/drill once!
|
|
|
|
Post by novafrk on Sept 28, 2011 10:42:51 GMT -4
I can't answer your question, but I'm assuming you have a set of 71 stock pegs. :-)
|
|
|
|
Post by hogsausage on Sept 28, 2011 10:45:52 GMT -4
I sure do, you need them? I found a couple different solutions for my build. Just trying to decide on how to proceed. I'll get back to work next month after I'm all done playing with my dirt bike.
|
|
|
|
Post by novafrk on Sept 28, 2011 18:14:25 GMT -4
I'd like to borrow them at least. I know this bike was laid down once or three times... I'm not sure if mine are bent or not.
|
|
