Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 23, 2014 22:50:39 GMT -4
I was going to recommend Columbia River mandrel bending for custom exhaust needs BUT.... last year I got a pair of 45 deg bends and couplings that worked out nice. last month I got another set for another project. 2 X 45 deg bends that were only 43 deg. on this application I needed 45 on the money. they said +/- 2 deg was "pretty much" the industry standard. ...how convenient for them. I told them my standard was to get the product they advertised. they said I could return them ($18.75) and they would look through the pile and see if any were 45. BULLSHIT. I told them to suck it. my only recourse is to post here fwiw. and look for a new bender
|
|
|
|
Post by leadkrm on Mar 24, 2014 12:51:27 GMT -4
Sucks. I don't know any benders. I'll keep an eye open for one though
|
|
|
|
Post by flatout on Mar 24, 2014 14:34:34 GMT -4
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 24, 2014 16:29:32 GMT -4
he does good work. my guess is he's buying the bends and welding them up to suit his fancy, that's what I am doing. just need a new supplier. do you know if he do the mandrel bends himself? thanks flat. nice photos. would love to see more street trackers getting built. my favorite pilot...  |
|
|
|
Post by flatout on Mar 24, 2014 19:15:12 GMT -4
Hey Iso, is that you on #3 and is that the the stadium in Daytona. You might give Gordon a call, if I remember right he has a mandrel bender and will do what ever you need.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 25, 2014 0:04:30 GMT -4
ha ha nooo, I should be so lucky. that be Jason Griffin, the one armed bandit. click on the pic and look close. this guy is a gladiator. saw him about 5 years ago at the Indy Mile. I don't know where the track in the pic is. thanks for the heads up on the bends.
|
|
|
|
Post by flatout on Mar 25, 2014 15:10:04 GMT -4
WOW! Did not notice that until you pointed it out. That is talent.
|
|
|
|
Post by iruvakusifoxe on Jun 6, 2019 18:43:52 GMT -4
|
|
|
|
Post by ojuneloti on Jun 6, 2019 20:26:47 GMT -4
|
|
