Post by leadkrm on Feb 12, 2014 0:41:08 GMT -4
I decided to make an auxiliary fuel cell for working on bikes or to take with me to test potential buys. I took
1. a 5 dollar stainless steel
2. A 1/4" 1 1/2" nipple
3. This is optional. I could have used a simple fuel valve from the auto parts store but had access to a ball valve and used it instead
4. A 1/4" pipe to 1/8" hose barb adapter.
5. Some vinyl tubing
6. And last but not least the almighty jb weld!
Drilled a hole in the bottom of the bottle. It was fitted with some Teflon and screwed in a thread or two. Then Jb welded all around. After it cured I out the rest of the fittings together. Holds fuel well. It will come in handy for sure!