taggat
Junior rider
Posts: 732
|
Post by taggat on Jun 13, 2012 9:59:06 GMT -4
Very cool fellas! Id soak that chain in some pb for a month haha!
|
|
550fi
Junior rider
75 CB 550 F1,79 CM 400 A,72 CT 70 K1,Unknown ct 70 clone 05 GY6 scooter ,70 CT 70
Posts: 624
|
Post by 550fi on Jun 13, 2012 11:56:03 GMT -4
Looks like I may be bringing three bikes to the pit races.
|
|
|
|
Post by tango911 on Jun 13, 2012 12:43:06 GMT -4
cool
|
|
|
|
Post by tango911 on Jul 3, 2012 11:43:56 GMT -4
Update: not much happening since i got back from vacation. Keith ordered 2 carb sets , one for me and one for his project. Ill be stashing them away till i get the carbs off and cleaned.
Next step is pull off the carbs and then the engine, send the frame and parts to the powder coater. While thats being done Ill soda blast the carbs, engine, hubs and whatever else needs cleaned. Ill post pics as i go.
Brad, I need a pit bike to race, worst case ill race my daughters baja 70 in the pit bike race just to look like a goon.
steve
|
|
550fi
Junior rider
75 CB 550 F1,79 CM 400 A,72 CT 70 K1,Unknown ct 70 clone 05 GY6 scooter ,70 CT 70
Posts: 624
|
Post by 550fi on Jul 3, 2012 15:25:49 GMT -4
should be fun at least,sitting in a hotel room in Niagara Falls as its taining right now.Been on vacation here and its been great,be back on the fifth.
|
|
|
|
Post by revnkevn on Jul 3, 2012 16:12:08 GMT -4
keep postin pics ! you have my attention ! i have a 74 h1 also with the same plans for it,mild cafe etc... . also have a 72 s2 thats going to be a cafe also . i've just gotta get my garage ready and start.
|
|
|
|
Post by hogsausage on Jul 4, 2012 16:32:49 GMT -4
I smell a race a brewin'.
|
|
|
|
Post by tango911 on Jul 13, 2012 15:19:20 GMT -4
had a chance to get in the garage and work on the h1   Uh oh, found out why she leaks oil :0 looks like a bolt protrusion and a horizontal crack!  |
|
550fi
Junior rider
75 CB 550 F1,79 CM 400 A,72 CT 70 K1,Unknown ct 70 clone 05 GY6 scooter ,70 CT 70
Posts: 624
|
Post by 550fi on Jul 14, 2012 13:48:17 GMT -4
That doesnt look good,maybe replace the case.
|
|
|
|
Post by tango911 on Jul 14, 2012 14:06:57 GMT -4
prob just replace the cover, but need to see why it happened.
|
|
|
|
Post by tango911 on Jul 20, 2012 0:06:54 GMT -4
update: frame and rims are at the powdercoater. Hubs are ready to be stripped and painted and or polished out. Then new wheel bearings. Im thinking about gold hubs.   |
|
|
|
Post by tango911 on Aug 7, 2012 22:07:48 GMT -4
Few updated Pics with some polishing  Powdercoating done on frame and rims.  slight prob, oil pump gear bolt backing out of the main crank :0  theres the culprit  Hopefully Roger has a used bolt for me  Parts to start painting and polishing on.  Amazing what 20 mins on the polishing and buffing wheel will do :0 before  after (ill go over them all again)  before  after  (wow in the before you dont even see my reflection)  |
|
550fi
Junior rider
75 CB 550 F1,79 CM 400 A,72 CT 70 K1,Unknown ct 70 clone 05 GY6 scooter ,70 CT 70
Posts: 624
|
Post by 550fi on Aug 8, 2012 0:51:15 GMT -4
Nice work dude,wish I had the bbyg and the wtu you got,gonna be a sweet bike man.
|
|
550fi
Junior rider
75 CB 550 F1,79 CM 400 A,72 CT 70 K1,Unknown ct 70 clone 05 GY6 scooter ,70 CT 70
Posts: 624
|
Post by 550fi on Aug 8, 2012 0:58:34 GMT -4
That bolt can be saved,take a swiss needle file and file those threads out.takes a lot of time and patients,but can be done,I ve saved starter and gear selecter shafts that way,takes a lot of time.
|
|
|
|
Post by tango911 on Aug 8, 2012 9:05:09 GMT -4
That bolt can be saved,take a swiss needle file and file those threads out.takes a lot of time and patients,but can be done,I ve saved starter and gear selecter shafts that way,takes a lot of time. i actually did, re tap the thread on it, but id rather have a good solid bolt. since it was a prob in the first place, i dont want any chance of backing out again. I will use some blue lock tight on it as well. |
|
(wow in the before you dont even see my reflection)