|
|
Post by 72cl350 on Jun 5, 2011 10:25:49 GMT -4
I'm trying to run a break light/tail light and head light. I also want to make it kick start only. I'm thinking about putting a three way toggle on the head light. I don't care if I keep the battery. I took the gauges and turn signals of but am stuck from there. Any help would be appreciated.
|
|
|
|
Post by cb500bobber on Jun 5, 2011 10:30:21 GMT -4
Okay I did the same thing but I kept my battery and used my stock wiring harness or atleast some of it I did where are u from.
|
|
|
|
Post by 72cl350 on Jun 5, 2011 10:36:39 GMT -4
I'm from middletown. Got any suggestions where to start?
|
|
|
|
Post by felkman on Jun 5, 2011 10:37:13 GMT -4
I'm trying to run a break light/tail light and head light. I also want to make it kick start only. I'm thinking about putting a three way toggle on the head light. I don't care if I keep the battery. I took the gauges and turn signals of but am stuck from there. Any help would be appreciated. I am pretty sure that you will need that battery if you are wanting to run lights. Can you even run a cl350 without the battery? |
|
|
|
Post by leadkrm on Jun 5, 2011 12:08:01 GMT -4
Idk if that would work either. I have have a motorized bicycle like the one that was up at the steer inn and it doesn't use a battery but it does have something on the frame makes the spark fire. It is a small black rectangle. About 3x2x2 in size. Maybe there is a similar device for motorcycles. But the bike will need a dc power source to run lights
|
|
|
|
Post by cb500bobber on Jun 5, 2011 13:19:26 GMT -4
Well I used a fuse block from radio shack. Do you have a electrical drawing of it. If you don't a great place to check is oldmanhonda.com I would get one and make a copy of it then use white out and white out all the wires and things you wont be using then just start wiring everything its really not that hard its just confusing at first
|
|
|
|
Post by 72cl350 on Jun 5, 2011 13:31:32 GMT -4
I will have to try that. Should I just take out the whole harness and start from scratch?
|
|
|
|
Post by cb500bobber on Jun 5, 2011 13:42:26 GMT -4
Well it would make things easier and plus you can make it look alot cleaner. My harness was already out when I got my bike
|
|
|
|
Post by 72cl350 on Jun 5, 2011 15:54:02 GMT -4
Do I still need the ignition, starter, coils and stuff like that?
|
|
|
|
Post by cb500bobber on Jun 5, 2011 16:26:52 GMT -4
Ignition yes starter no coils yes u will still need the rectifier regulator
|
|
|
|
Post by tango911 on Jun 11, 2011 14:35:06 GMT -4
|
|
|
|
Post by 72cl350 on Jun 11, 2011 16:54:33 GMT -4
Sweet that will be helpful thanks
|
|
